BLOG of MASES

Έκθεση Τεχνολογικού Πανεπιστημίου Κύπρου 5/4/2017

23/4/2017

Η MASES SOFTWARE στην έκθεση που διοργάνωσε το Cyprus University of Technology / Τεχνολογικό Πανεπιστήμιο Κύπρου στις 5/4/2017

0 Comments

Το TimberTech Buildings αναβαθμίστηκε στην έκδοση v2.20161221.2152R.

21/12/2016

0 Comments

Command “Rename all elements” and improvement in exports of actions for the wall at the ground level

In the latest version of the software, we have added the following new features:

Command “Rename all elements”: using this function, you can automatically rename the elements of the model in order to avoid discrepancies in the continuity of numbering.
In-plane action export for wall at the ground level: in the table in which are showed the values of the actions for the walls located at the base of the structure we added a line relative to the combination for witch the in-plane moment is maximized and, at the same time, the axial sforce N is minimized. These values can be used in order to dimension the foundation and perform the geotechnical checks.
Bug fixing and small improvements

0 Comments

Το TimberTech Buildings αναβαθμίστηκε στην έκδοση v2.20161129.2139R.

29/11/2016

0 Comments

TimberTech Buildings (v2.20161129.2139R.)

New settings for platform frame walls, improvement of the calculation of the connections, new NADs added, new materials added, dxf export improved and new standards for materials added

In the latest version of the software, we have added the following new features:

Added new calculation options for the framed walls. The user has now the ability to manually change some of the parameters used in the calculation method proposed in section 9.2.4.2 of EN 1995-1-1: to disable the limitations related to the aspect ratio of the panels in the famed walls, to impose a value of the calculation coefficient ci different from that calculated automatically by the software and to edit the value of the amplification factor of the lateral bearing capacity of the connectors (1,2) suggested by the European standard at paragraph (5). Therefore the user can now adapt the calculation method to the specifications present in some national standards (e.g. Swiss regulations).
Calculation of lateral load bearing capacity of the fasteners in the punched metals plates and straps both for tension and for shear forces: The calculation is performed using the Johansen theory giving the user the possibility to combine a connector (nail or screw) to a plate or a punched metal strap. The software automatically performs a series of checks on the compatibility between the connecting elements (plates) and the fasteners chosen by the user and it uses the correct set of formulas, respectively, for thin or thick plates. The total carrying capacity of the group of fasteners is now calcluated using the effective number of fasteners which is evaluated according to points 8.3.1.1 (8) and 8.5.1.1 (4) of the EN 1995-1-1.
Added the possibiity to use the screws for plates in tensile and shear connections with perforated plates
Improvement of the calculation of timber to timber connections: the user can now choose the method of installation of the metal fasteners (screws and nails): with or without pre-drilling.
New National Application Documents (NAD) added. The NADs of the following countries were added: Bulgaria, Denmark, Estonia, France, Latvia, Lithuania, Norway, Portugal, Spain, Sweden, Switzerland.
XLAM archive updated with new products
Improvement of the dxf exports: the wall elements and the pillars are now exported to the DXF file with the actual dimensions and thicknesses
Solid wood strength values updated: values updated according to EN 338: 2016
Bug fixing and small improvements

0 Comments

Η MASES SOFTWARE ΣΤΗΝ ΕΚΘΕΣΗ CONSTRUCTIONS CYPRUS 2016 !!!

9/10/2016

0 Comments

H MASES SOFTWARE ΣΤΗΝ ΕΚΘΕΣΗ CONSTRUCTIONS CYPRUS 2016 !!!

Ευχαριστούμε θερμά όλους όσους μας τίμησαν και φέτος στην έκθεση !!!

Τα λογισμικά μας:

0 Comments

ΠΡΟΣΚΛΗΣΗ ΣΤΗΝ ΕΚΘΕΣΗ CONSTRUCTIONS CYPRUS 2016

29/9/2016

0 Comments

Η MASES SOFTWARE πιστή στο ραντεβού της θα λάβει και φέτος μέρος στην έκθεση ''CONSTRUCTIONS CYPRUS 2016''!

Στην έκθεση ''CONSTRUCTIONS CYPRUS 2015'':

http://masesoft.com/1/post/2015/09/exhibition-constructions-cyprus-2015.html

Η έκθεση Cyprus Constructions 2016 θα πραγματοποιηθεί από Παρασκευή 30 Σεπτεμβρίου έως Κυριακή 2 Οκτωβρίου 2016 στο εκθεσιακό κέντρο EXPOCYPRUS στην Λευκωσία.

Θα είμαστε στο Hall 6 - Περίπτερο 640d.

Ελάτε να γνωρίσετε τα πλεόν ισχυρά λογισμικά μας!

-> ΗΜΕΡΕΣ & ΩΡΕΣ ΛΕΙΤΟΥΡΓΙΑΣ

Πρόγραμμα λειτουργίας της έκθεσης

Παρασκευή 30 Σεπτεμβρίου 2016 από 16:00 έως 22:00
Σάββατο 1 Οκτωβρίου 2016 από 15:00 έως 22:00
Κυριακή 2 Οκτωβρίου 2016 από 12:00 έως 22:00

0 Comments

Έκθεση Τεχνολογικού Πανεπιστημίου Κύπρου 5/4/2017

Το TimberTech Buildings αναβαθμίστηκε στην έκδοση v2.20161221.2152R.

Το TimberTech Buildings αναβαθμίστηκε στην έκδοση v2.20161129.2139R.

Η MASES SOFTWARE ΣΤΗΝ ΕΚΘΕΣΗ CONSTRUCTIONS CYPRUS 2016 !!!

ΠΡΟΣΚΛΗΣΗ ΣΤΗΝ ΕΚΘΕΣΗ CONSTRUCTIONS CYPRUS 2016

MASES

ΑΡΧΕΙΟ

ΚΑΤΗΓΟΡΙΕΣ

Εγγραφείτε στο Newsletter μας